• Technical support of maintenance and operations disciplines. Distribution small task between engineers and providing report to lead engineer / technical manager. Lead the process of developing maintenance and inspection work packs (CRIP) belong to static equipment (piping, pressure vessel, heat exchangers, ATR and WHB etc.). • QA/QC the TAR activities and coordinate TPI contractor during the ATR and WHB internal inspection. Inspection of tube length, refractory, ferules, cerules, liners and anchors. Internal inspection of fire heater refractory material, gas burners, insulation and tubes, isolation wall. Visual and DPT inspection of spare thermowell, burners of ATR. ATR refractory tube sheet inspection. SMR replacement castable and insulation pads. • Developing maintenance / inspection strategies and repair procedures of mechanical static equipment in accordance international standards (API, ASME) and local standards (GOST). Developed the master catalog for spare parts of pressure vessels including all materials and consumables, result: bill of material (BOM) for static equipment (pressure vessels, heat exchangers, columns, valves). Developed list of 2-years spare parts. Developed the inspection plans and pressure safety valve schedule of pop-up test. Raising the PR in SAP 4/HANA, transaction IW51,52,53, IH01, ME5A. Planning and preparation the OPEX budget. • Providing the technical bid evaluations (TBE), working with material requisition (MR), ITP, scope of supply, piping MTO and other project documents. • NDT ASNT – Level II (DPT/MPT, UT, VT) hardness test, thickness measurement, borescope inspection of ASU and ATR static equipment (Cold box, vessels, absorber, column, burners and piping and etc.). Preforming external visual thermal inspection with IR - camera FLIR T540. • Experienced in MS Office, ASSAI, AVEVA 3D, SAP (CMMS), AutoCAD, SolidWorks, Navisworks, FLIR Thermal Studio, standards ASME B16.20, B16.5, B16.47, B31.3; API 510, API 570 and GOST.

• Providing the strategic maintenance and inspection of static equipment in GTL plant. Performing daily activities to preventive / predictive / diagnostic / failure correction related to all static equipment. Responsible for pressure system equipment and checking readiness be for start-up, sigh the PSSR. • Developed the master catalog for spare parts of pressure vessels including all materials and consumables, result: bill of material (BOM) for all static equipment (pressure vessels, heat exchangers, columns, valves). Developed list of 2-years spare parts. Developed the inspection plans and pressure safety valve schedule of pop-up test. Raising the PR in SAP 4/HANA, transaction IW51,52,53, IH01, ME5A. • Providing the technical bid evaluations (TBE), working with: material requisition, ITP, scope of supply, piping MTO and other project documents. • Preparation the OPEX budget, analyze the CAPEX expense during TAR. • Lead the process of developing maintenance and inspection work packs for all static equipment (piping, pressure vessel, gas and heat exchangers, reactors and etc.). Clouse work with TAR contractor, third party inspectors and support maintenance discipline with technical issues. Preparation critical spare part list and consumables (bolts, gaskets, filler wire and etc.). • Quality control repair of air separation unit (ASU) equipment (main heat exchanger (MHE); steam heater, oxygen heater and etc.). QA/AC of oxygen cleaning. Developing the method statement. • NDT inspection (DPI, UT, PMI, hardness test, thickness measurement, borescope inspection) of ASU and ATR static equipment (Cold box, vessels, absorber, column, burners and piping and etc.). Guidance standards of GOST, ASME, API 510 and 570 recommendations for identification the intervals of inspection. • Experienced in MS Office, ASSAI, AVEVA 3D, SAP (CMMS), AutoCAD, SolidWorks, Navisworks, standards ASME B16.20, B16.5, B16.47, B31.3; API 510, API 570 and GOST.

• Implementation in Maintenance and Inspection Engineering Contractor (MIEC) including development the maintenance task list, developing and integration the material masters for piping and static equipment in catalog of SAP 4/HANA (CMMS). • Solving engineering tasks are related with design and researching manual valves (Ball, Gate, Globe, Butterfly) are matched with piping specifications of project. Selection of valve seal (SPE, DPE, flouting, trunnion, cryogenic service etc.). Providing the technical assessment in accordance with technical specification for manual valves (piping class, flued, pressure, temperature, materials, seat (soft, metal to metal, body cavity pressure relief system). • Identify parameters of mechanical piping and static equipment including BOM (bill of materials), operations parameters (pressure rating, temperatures, capacity, TAG plates etc.). Analyzing of drawings, calculations, documents and specifications related to mechanical design. • Performing piping mechanical calculations (the stress analysis) by finite element analyze (FEA) using SolidWorks. • Familiarizations with construction of modules on the yards WISON/COSCO/LBT/QMW. Checking completion and reediness all static equipment (vessels, filters, HE, piping, piping supports, nuts, bolts and ets.) in accordance with PID. Preparation punch lists, carryover reports, checking warehouse material for completions of construction. • Supervising and review project documents of mechanical static discipline deliverables and others such as Piping Material Specifications (PMS), P&IDs, Piping Plans, Data Sheets, Plot Plans, General Arrangement (GA) drawings, Review Philosophies, and other relevant documents. • Creation MTO and purchase requisitions (PR) of 2 years’ spare parts and consumables to reliable operation of mechanical static and piping equipment. Providing the technical bid evaluations (TBE) of manual valves, pressure relief valves (PRV-pilot, bellow, conventional), gaskets: SW, RTJ, filters. Working with vendors, suppliers and EPC • Developing maintenance strategies and procedures of mechanical static equipment in accordance with international standards (API, ASME) and local rules (GOST, RTN). • Supervising of performing maintenance and inspections planes of static equipment in accordance international standards (API 579, 510, 570). Providing the repair methods and frequency inspection static equipment. Participating the failure method effect analysis (FMEA) and the root cause analysis (RCA), assistance the planning maintenance work, compliance with health and safety requirements, industrial safety and environmental protection. • Upholding engineering ethics and maintain high standards of professional behavior and conduct. • Experience in MS Office, ASSAI, AVEVA 3D, SAP (CMMS), AutoCAD, SolidWorks.

• Mechanical packages: equipment manuals/specifications/spare parts lists/technical passports/mechanical data sheets/material requisitions. Booster Compressor Station, Glycol Dehydration, Instrument Air Generation, Chemical Injection, Vacuum System, Fuel Gas. • Working on Development Standards/Data Sheets/Other Tools to improve productivity. Participating as the main interface in converting the project from concept to detailed engineering • Developing of maintenance strategies and procedures, schedule of predictive and prescriptive maintenance (PPM). Preparation static and rotating equipment to shutdown NGL plants. • Planning repair of equipment in the SAP PM systems; checking P&ID. Supervising contractors’ as per contract. Verifying and closure of punch-list created during FATs. Participation in risk assessment HAZARDs and operability study, HAZID, JHA, PTW. • Major equipment handling: pump of centrifugal (API 610) and reciprocating (API 674) type, compressor drive gas turbine (API 616, 617), separators, absorbers (Sulzer Hemteh Russia) and other sort equipment of Gas Treatment Plant.

The project at Lukoil Filanovskiy offshore platform Developing Predictive analytic program. Supporting the IT team in technical issues. Analyzing all sensors by TAG and validation in schemes (pumps SULZER (ENSIVAL MORET), compressors DRESSER-RAND).

• Re-installation and commissioning of pumping equipment returned from overhaul. Hands-on experience with maintenance / overhauling of all rotating equipment (Pumps (API 610, 674), Compressors (API 617), Turbo-expander (API 617), Blowers, etc.) and static equipment (Separators, Absorbers (Sulzer Hemteh Russia, Columns). • Monitoring maintenance progress by schedules, analyze deviations and recommend corrective actions. Preparation detailed reports, diagrams and schemes for detailed schedule issues and making recommendations. • Experience in Safety rules (Hazards) and Job Hazard Analysis (JHA).

Internship, when I studied in university

Mechanical engineering , Mechanical engineering

Mechanical, Master program "Technologically machines and equipment"

Mechanical, Machinery and equipment for production of oil and gas

Total